1. <em id="xxpvo"><tr id="xxpvo"><kbd id="xxpvo"></kbd></tr></em>
  2. <s id="xxpvo"><object id="xxpvo"><input id="xxpvo"></input></object></s>

  3. <em id="xxpvo"></em>
  4. <em id="xxpvo"><acronym id="xxpvo"><kbd id="xxpvo"></kbd></acronym></em>

    祥繁健身器材-家庭和商業健身解決方案提供商。免費熱線:158-0091-0943 / 400-1860-258

    企業分站  |   網站地圖  |   RSS  |   XML

    健身器材廠家

    咨詢熱線

    400-1860-258   

    15800910943

    產品banner

    產品展示 Product

    聯系我們Contact Us

    上海祥繁健身器材有限公司

    手機:15800910943

    網址:www.yoyojk.com

    地址:上海市嘉定區華江公路129弄7號J3115

    羽毛球場建設方案

    2020-08-21 10:56:55
    羽毛球場建設方案
    詳細介紹:

    羽毛球場為一長方形場地,長度為13.40米,雙打場地寬為6.10米,單打場地寬為5.18米。球場上各條線寬均為4厘米,丈量時要從線的外沿算起。球場界限用白色、黃色或其它易于識別的顏色畫出。按國際比賽規定,整個球場上空空間為9米,在這個高度以內,不得有任何橫梁或其它障礙物,球場四周2米以內不得有任何障礙物。任何并列的兩個球場之間,少應有2米的距離。球場四周的墻壁為深色,不能有風。


    羽毛球場一般使用的面層材料有硅PU塑膠羽毛球場、PVC塑膠地板,木地板羽毛球場等。

     

    目前市場上還有一種新的地板材料DIY拼裝地板(懸浮式拼裝地板),相對而言價格很便宜是施工方式就是直接在水泥基礎上鋪設PVC塑膠地板,PVC塑膠地板是卷材,鋪設方便,鋪好后即可直接使用;硅PU塑膠地板相對造價要高于PVC塑膠地板; 而價格貴的是木地板,但是目前對運動地板要求高的訓練單位一般會采用在木地板上再鋪設一層PVC塑膠地板,運動效果更佳,場地高檔美觀。

     

    PVC塑膠地板

    ⒈ 能夠用少的初期投資費用創造出好的體育活動空間。

     PVC彈性地板材料是國際正式的包括籃球在內的所有球類運動場地的不二選擇。只有PVC運動地板才可能被用來鋪設國際公認的羽毛球、乒乓球、排球、手球等的比賽場地。

    ⒊ 與硬質地面相比,具有良好的安全性、減震性和反彈力,自身的運動性也得到充分的發揮。

    ⒋ 耐用、美觀,并有多種顏色和款式可供選擇。

     

    地板材料結構精密

    ⒈ 產品由PVC耐磨層、玻璃纖維加強層和PVC發泡緩沖層組成。

     99%PVC耐磨層,經防老化和緊固技術處理,耐磨耐壓,使用壽命可達15年。

    ⒊ 玻璃纖維加強層起到穩定場地尺寸、延長使用壽命的作用,使地板永不收縮,性能更加穩定,使運動員發揮出更好水平。

    ⒋ 封閉式PVC發泡緩沖層材料如氣墊式構造,提供安全性、回彈性和標準的吸振性,吸振率達到30%50%。

     PVC發泡緩沖層底面采用狀紋路處理,合理的重量能在場地鋪開時將里面的空氣排出,形成真空,更加具有附著力,在運動時更具有穩定性。

     

    舒適性佳

     PVC耐磨表層的荔枝皮花紋設計,另鞋底時刻緊著地面,防滑且能隨心所欲傳遞強勁的動力。

    ⒉ 場地表層經特殊處理,與燈光亮度吻合,不會吸光和反光刺眼,能更好的保護運動員的眼睛,不易產生疲勞。

    ⒊人性化的設計組合,與眾不同的場地色感,防滑且回應動力極強,防擦傷紋理,全新技術開發的PVC發泡緩沖層為健康運動帶來可靠保障,為專業運動員、普通健身民眾提供極好的運動緩沖保護,可限度地減小運動員的損傷,令您放心地馳騁在運動賽場上屢奪佳績。

     

    移動性佳

    地板表面的類人體工程學不規則圓形紋理弧邊設計,使滑動系數為佳值,使運動員有更佳的活動能力,為起動、蹬 跳、滑步、制動等各種專業劇烈技術動作提供極具爆炸力的彈性動力結構。

     

    綠色環保

    產品具有高新技術抗菌功能,具有無毒、無味、綠色環保、防水、防滑、防霉菌等特性.

     

    二 對場地基層要求

    1.施工的地面必須保持清潔,持久干燥,且沒有裂縫。

    2.混凝土地面含水率不得超過2.5%,石膏地面含水率不得超過0.5%。

    3.地板表面2m直尺范圍內誤差不大于3mm。

    此外,木地板、復合木地板、瓷磚、大理石和水磨石地板平整度達到要求均可鋪裝。

     

    三 鋪裝方法

    在地板鋪設之前,地面必須清掃干凈,地板提前展開平鋪在地面24小時以上,且現場溫度不應低于15度。地板還原后,切割時兩端應多留5厘米。

    1.移動式鋪裝:地板與地板之間用廠家配套的專用單面連接帶粘接成一體,地板與地面不粘接,以方便將來移動。

    2.局部固定式鋪裝方法:在地面上以地板的邊緣線為基準向內刷10cm的膠粘接,或用廠家配套的專用雙面連接帶粘接。

    3.全膠粘接鋪裝方法:塑膠地板與地面全部用膠水粘接。(籃、 網球場地采用全膠粘接,否則球與地面接觸時會影響球的反彈)

     

    焊接-熱焊法

    地板焊接前先用手工或者機器在地板接縫處開槽,開槽處必須清理干凈,熱焊時的溫度不低于500度,焊接可采用自動設備或人工操作。正式焊接前,先用一小段焊線,來測試一下焊接時適當的溫度,焊縫處冷卻后分兩步去除多余的焊線,先用月牙鏟鏟掉焊線突起部分的一半,待焊線充分冷卻后,鏟去余下部分。



    Badminton court is a rectangular field, length of 13.40 meters, 6.10 m wide field doubles, singles field 5.18 meters wide. The width of the pitch of each 4 cm, measured from the line when the outer edge of the date. The court boundaries is best to use white, yellow or other colors of paint for easy identification. According to the provisions of the international the game, the stadium over the space for a minimum of 9 meters,in this height,shall not have any beams or other obstructions.

    Oraround the stadium within 2 meters without any obstacles.Between any two parallel court shall have a minimum distance of 2 meters. The stadium walls preferably dark, nowind.



    Badminton courts are generally used in the surface layer of silicon PU plastic badminton courts, PVC plastic floor, wooden floor badminton courts and so on.

     

    Currently on the market there is a new DIY flooring flooring (suspension flooring), relative price is the cheapest,the form of construction is directly on the cement foundation laying the PVC plastic floor, PVC plastic flooring is a coil material, convenient laying, can be used directly after paved; silicon PU plastic floor relative cost is higher than that of PVC plastic floor; and the most expensive wooden floor, but the floor movement demanding training units generally use a layer of PVC plastic floor paved on the wooden floor, the movement effect is better, the site has a high-grade appearance.

     

    一、PVC plastic floor

     

    1. can create the best sports space with the least early-stage investment.

    2.The PVC is a formal international elastic floor materials include basketball, sports venues all the best choice. Only PVC can be used to build sports floor international badminton, table tennis, volleyball, handball and other venues.

    3.compared with the hard ground, with good safety, and rebound damping, the movement itself has been fully played.

    4.Durable, beautiful, and has a variety of colors and styles to choose from.


     


    Floor material structure precision

     

    1.The product from PVC wear-resisting layer, glass fiber reinforced foam layer and PVC buffer layer.

    2.The 99% pure PVC wear-resisting layer, the anti-aging and fastening techniques, wear resistant, the service life of up to 15 years.

    3.glass fiber reinforced layer to stabilize the size of the field, prolong the service life of the role, so that the floor will never shrink, the performance is more stable, so that athletes play a better level.

    4.The closed PVC foam cushion layer material such as air cushion structure, provide absolute security, resilience and vibration standard, vibration absorption rate of 30% - 50%.

    5.The PVC foaming buffer layer the bottom of the shape of grain processing, reasonable weight can site spread when the inside of the air, forming a vacuum, more adhesion, more stability in motion.

     

    Good comfort

     

    1.The pattern design of litchi peel PVC wear surface, the other shoe sole moment tight ground, non skid and can transfer a strong impetus.

     

    2.The ground surface by special treatment, consistent with the brightness of the light, not absorb light and reflective glare, athletes can better protect the eyes, not easy to produce fatigue.

     

    3.User-friendly design, the site out of the ordinary sense of color, non skid and dynamic response is extremely strong, anti abrasion texture, PVC foaming buffer layer new technology development for health movement to bring reliable support for professional athletes, ordinary people to provide a buffer to protect the excellent fitness exercise, can reduce the injury, make you rest assured ride in the sports arena wins success.

    Better mobility

     

    Type of ergonomic floor surface irregular circular arc edge texture design, so that the sliding coefficient is the best value, so players have better activity for starting, leg jumping, sliding, braking and other professional technology intense action to provide elastic dynamic structure of highly explosive force.

     

    Green environmental protection

     

    The product has the high - tech antibacterial function, has non-toxic, tasteless, green environmental protection, waterproof, non slip, anti - mildew and so on.

     

    二、Two basic requirements for the site

     

    1.construction of the ground must be clean, durable, and no cracks

    2.concrete surface moisture content shall not exceed 2.5%, gypsum ground moisture content shall not exceed 0.5%.

    3.The surface of the floor is 2 meters straight range error is less than 3 meters.

    In addition, wood flooring, composite wood flooring, ceramic tile, marble and terrazzo floor flatness can meet the requirements of pavement.

     

    三、Paving method

     

    Laying on the floor before the ground must be cleaned,the ground ahead of the start tile on the ground for more than 24 hours,and the temperature should not be less than 15 degrees. The floor after reduction, cutting ends should stay 5 cm.

     

    1.mobile pavement: the floor and the floor with the manufacturers supporting the use of a single side with a single adhesive tape, the floor and the ground does not adhere to facilitate future movement.

     

    2.local fixed paving method: on the ground floor to the edge of the line as the benchmark to brush 10CM of glue,or the use of specialized manufacturers with double-sided adhesive tape.

     

    3.glue adhesive paving method: plastic floor and the ground with all glue. (basket, tennis court is best to use glue bonding, otherwise the ball and the ground contact will affect the ball bounce)

     

    Welding heat welding method

     

    The floor before welding by hand or machine on the floor seam slot, slot must be clean, heat welding when the temperature is not lower than 500 degrees, welding can be automatic equipment or manual operation. The official before welding, first with a short welding line, to test the welding temperature, welding seam after cooling two steps to remove the excess wire, first with the crescent shovel,shovel out half the welding line of the protruding part, the welding line fully cooled, shovel to rest.



    上一篇:S516羽拍拉線機2020-09-05
    下一篇:沒有了

    Z近瀏覽:

    健身器材廠家

    關注微信

    强奷漂亮的女教师中文字幕_欧美黑人巨大videos精品_国语对白老太老头牲交视频_人妻在线日韩免费视频